Hallo from Germany

Your chance to introduce yourself and your vehicle
ItaloManyak
Posts: 69
Joined: Sun Sep 08, 2013 2:33 pm

Re: Hallo from Germany

Post by ItaloManyak »

Do not reinvent the wheel!
you need to set everything as 2.2T AAN engine.
and Turbo too :D
I have 2.2T (ADU) for a long time.
built 7A engine turbine.
If you do not push the boost greater than 1 bar all will work in the stock motor
Horsty
Posts: 31
Joined: Fri Oct 07, 2016 10:38 am
Location: Cologne / Germany

Re: Hallo from Germany

Post by Horsty »

i'm finally working on my ecu build again.

am i right that i can use the tc4427 for the injectors switching ground on inverting mode in tunerstudio?
You do not have the required permissions to view the files attached to this post.
Track: Audi Coupé Quattro R5 Bj. '89 | 2.3 Liter | 7A | 170 bhp | Perlwhite L0A9
Daily 2014- : Volkswagen Lupo Bj. '99 | 1,0 Liter | ALL | 50 bhp | Flashred LP3G --> conversion to AEX 1.4 8v 60 bhp --> conversion to AEE 1.6 8v 75 bhp
User avatar
AndreyB
Site Admin
Posts: 14727
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Hallo from Germany

Post by AndreyB »

Horsty wrote:am i right that i can use the tc4427 for the injectors switching ground on inverting mode in tunerstudio?
taking your question to http://rusefi.com/forum/viewtopic.php?f=4&t=450
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Horsty
Posts: 31
Joined: Fri Oct 07, 2016 10:38 am
Location: Cologne / Germany

Re: Hallo from Germany

Post by Horsty »

thanks. didn't read that thread properly.. . :roll:

edit: just ordered some VNP14NV04-E.
Track: Audi Coupé Quattro R5 Bj. '89 | 2.3 Liter | 7A | 170 bhp | Perlwhite L0A9
Daily 2014- : Volkswagen Lupo Bj. '99 | 1,0 Liter | ALL | 50 bhp | Flashred LP3G --> conversion to AEX 1.4 8v 60 bhp --> conversion to AEE 1.6 8v 75 bhp
Sergio2048
Posts: 1
Joined: Tue Apr 22, 2025 6:29 am
Github Username: Sergio2048
Slack: dont have

Re: Hallo from Germany

Post by Sergio2048 »

Horsty wrote:
Tue Oct 11, 2016 4:04 pm
Look what i've found:

IMG_9567.JPG
IMG_9568.JPG

Audi 80 automatic ac connector which fits perfectly to the second gen. 7A stock engine wiring loom. :mrgreen:

IMG_9575.JPG

Was quite hard to get that connector of that old bord, but the heatgun did the trick.

ordered parts:
- LT1084-CP5 5V/5A low dropout fixed voltage regulator
- some universal pcb's 150x200mm
Hello, i'm here new building some ecu for my 7A, i'm very new with this engine but please, can you reply me what is the partnumber for this 4 plug 7A? or do you have any links? thank you.
and if you have wiring diagram because i'll build my pcb too.
thank you so much, I can pay if want...
Post Reply