Your chance to introduce yourself and your vehicle
AndreyB
Site Admin
Posts: 14727 Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B
Post
by AndreyB » Thu May 09, 2024 4:43 pm
Many years ago I had a not so bright orange vehicle with a Honda K engine. It has blown the head gasket for not good reason
So I've decided to purchase a bright orange vehicle, again with Honda K engine, this time GDI and turbo-charged! And Acura Care Extended Warranty
WhatsApp Image 2024-05-09 at 12.24.27_5318d121.jpg
You do not have the required permissions to view the files attached to this post.
AndreyB
Site Admin
Posts: 14727 Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B
Post
by AndreyB » Tue May 21, 2024 2:27 am
Active Dumper System, the less fancy one without stroke sensors like on Civic Type R.
Why do they run two dedicated wires to each strut solenoid? Why not shared high side?
image.png
image.png
You do not have the required permissions to view the files attached to this post.
mck1117
running engine in first post
Posts: 1501 Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish
Post
by mck1117 » Tue May 21, 2024 7:47 am
AndreyB wrote: ↑ Tue May 21, 2024 2:27 am
Why do they run two dedicated wires to each strut solenoid? Why not shared high side?
look at a modern engine harness too, OEMs avoid splices like the plague if they can
puff
contributor
Posts: 2963 Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau
Post
by puff » Tue May 21, 2024 7:52 pm
mck1117 wrote: ↑ Tue May 21, 2024 7:47 am
look at a modern engine harness too, OEMs avoid splices like the plague if they can
but what's the reason? to simplify diagnostics?
mck1117
running engine in first post
Posts: 1501 Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish
Post
by mck1117 » Mon Jul 08, 2024 6:12 pm
puff wrote: ↑ Tue May 21, 2024 7:52 pm
mck1117 wrote: ↑ Tue May 21, 2024 7:47 am
look at a modern engine harness too, OEMs avoid splices like the plague if they can
but what's the reason? to simplify diagnostics?
Splices are less reliable than running a separate wire to the ECU. Splices are probably actually more expensive too, since they need an extra step of joining multiple wires together, rather than just "wire with something crimped either end" which you can automate.
AndreyB
Site Admin
Posts: 14727 Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B
Post
by AndreyB » Tue Aug 06, 2024 12:10 am
I think it uses an NTK wideband so we have a chance to poke into a running vehicle
Internet says
Blue = Heater +
Yellow = Heater -
Grey Wire = Vs
White Wire = Ion Pump
Black Wire = 0v
My multimeter says 3.5Ohm between blue and yellow, and I have a patch cord ready for poking
WhatsApp Image 2024-08-05 at 20.09.09_c0462a06.jpg
You do not have the required permissions to view the files attached to this post.