99 Honda VFR800, PnP ECU NOW turbo EVENTUALLY

[coolantbongrips]

I have a pogo pin adapter but stupidly left my STlink at work and can't flash anything until next week

[AndreyB]

can't flash anything

Main MCU would take firmware via USB in DFU mode? if you had USB soldered?

[AndreyB]

Do you know part numbers for those while and black ECU headers for me to add on https://github.com/rusefi/rusefi/wiki/OEM-connectors?

[coolantbongrips]

Do you know part numbers for those while and black ECU headers for me to add on https://github.com/rusefi/rusefi/wiki/OEM-connectors?

I don't. All I know is they're made by sumitomo and don't appear in any of the 90s/2000s era catalogs I was able to find, nor have I or anyone else been able to find a part number.

I got them by emailing ignitech@ignitech.cz and asking to buy 10 of each color since they sell ECUs and ignition controllers for other bikes with this style of connector

[coolantbongrips]

As far as I can tell the ECU works save for possibly having to tune the VR input. I uploaded a new tune and datalog to rusEFI online, trigger error was incrementing but the trigger events in the log looked okay. I won't have time to troubleshoot until tonight.

[coolantbongrips]

As far as I can tell the ECU works save for possibly having to tune the VR input. I uploaded a new tune and datalog to rusEFI online, trigger error was incrementing but the trigger events in the log looked okay. I won't have time to troubleshoot until tonight.

Never mind I'm a dumbass and was interpreting the log wrong, it starts if I give it some throttle and runs but won't idle. I'll try and work out something resembling a tune this weekend

[coolantbongrips]

Project stalled for the forseeable future, I broke a rod or something

[AndreyB]

Project stalled for the forseeable future, I broke a rod or something

While cranking? While revving? While not rusEFIing?

[coolantbongrips]

Project stalled for the forseeable future, I broke a rod or something

While cranking? While revving? While not rusEFIing?

While cranking, I don't even know when exactly it happened and the last time it ran it was on the stock ECU. I plugged the rusEFI back in tonight to test some things, tried to start it, and now I'm getting some horrible noise. I'll dig deeper into it tomorrow

[AndreyB]

Just for the record, proper "CBR 600" setup would look something like

https://github.com/rusefi/rusefi/issues/6420

image.png (66.95 KiB) Viewed 101 times