STM Sleep/Stop/Standby

It's all about the code!
Post Reply
nmstec
contributor
contributor
Posts: 124
Joined: Tue Oct 05, 2021 9:02 pm
Location: Vancouver

STM Sleep/Stop/Standby

Post by nmstec »

Proteus R0.6

STM32F767. PA0 Wake-up

No hardware modifications

Running state 100mA
Stop state 40mA
StandBy state 30mA


With CAN transceivers removed & Power LED disabled

UNKWN

With CAN transceiver replaced & Power LED disabled

UNKWN

With TLS208D1, CAN transceiver replaced & Power LED disabled

UNKWN





____________________________________

TODO
  • Fix Standby mode wakeup.

    Make list of shared interrupt pins with most amount of MCUs. -SubTODO- use unused interrupt as to make integration easier.

    Find & test alternative can transceivers. Have plenty of TJAs & 82c. Awaiting arrival of TJR1443, which are probably perfection, with dedicated wkup/error pin. -SubTODO- Implement TJR properly, to allow error reading.

    Implement external wakeup as well.
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."

-Dave B, Hero, Tuner, and probably has a car.
Top
mck1117
running engine in first post
running engine in first post
Posts: 1501
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: STM Sleep/Stop/Standby

Post by mck1117 »

Here's an accounting of where the power is going on Proteus with the STM32 in standby mode.
image.png
You do not have the required permissions to view the files attached to this post.
Top
nmstec
contributor
contributor
Posts: 124
Joined: Tue Oct 05, 2021 9:02 pm
Location: Vancouver

Re: STM Sleep/Stop/Standby

Post by nmstec »

SD Card in AWAKE & STOP eats 7-8mA more.
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."

-Dave B, Hero, Tuner, and probably has a car.
Top
Post Reply

Return to “Dev: Software”