[info] Locost7 Bp4w-T

Your chance to introduce yourself and your vehicle
Post Reply
nottinghamster
Posts: 1
Joined: Sat Oct 23, 2021 9:42 pm

Locost7 Bp4w-T

Post by nottinghamster »

Hello , I’m jon . Last year I built a lotus 7 replica from the ground up with a little bit of my own flavor . It’s powered by a 2000 mx5 engine (bp-4w) with a Saab 9-5 turbocharger (tdo4hl-15t) abd a 5 speed . The suspension is a complete mix from lotus Elise coilover shocks , Mazda RX8 rear lsd and subframe and front handmade control arms . The seats are from a 90s Porsche 911. I’m currently running a factory ecu with a rising rate fuel pressure regulator . My RusEfi should be arriving tomorrow and I’m excited to start trying to tune with it. I mainly use the car for weekend spirited drives and local autocross .
20D4FCBF-B012-4591-B7C5-5D94B375B5FF.jpeg
BE4AE19F-601D-47BE-8362-3BA89E179232.jpeg
20C5EA66-CD7E-4BA5-AEFA-8AB71D86695D.jpeg
5C971EF0-F2EA-49C2-8560-5702D622E2CD.jpeg
0A6707A4-C979-4088-B63B-752C77ECB1E9.jpeg
7C73F09F-AC68-43AB-8F5F-87096D9949EC.jpeg
B334CB97-D9DA-4A2C-A574-47AE89F9DD27.jpeg
80D0F380-D6B2-47EC-A17A-A04F0B3CA1CC.jpeg
ACA7EAC9-21B5-4822-BBEF-69081A96DC0A.jpeg
A3F75C91-24F5-4F67-8DD1-13994284EAD7.jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
AndreyB
Site Admin
Posts: 14727
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Locost7 Bp4w-T

Post by AndreyB »

Are you somewhere in US?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
stefanst
contributor
contributor
Posts: 704
Joined: Wed Feb 17, 2016 12:24 am
Location: USA 08530

Re: Locost7 Bp4w-T

Post by stefanst »

AndreyB wrote:
Thu Oct 28, 2021 6:29 pm
Are you somewhere in US?
Looking at the U-Haul trailer, I would assume the answer is yes.

Also: His unit is a Frankenso that I set up for 99-00 Miata maybe 2 years back? Maybe only last year. I forget. I'm not sure it actually ever ran a car.

So, @Nottinghamster: Get a full license of TunerStudio and Megalogviewer. (MLV is not 100% necessary, but it helps). Then see if you can connect to the ECU from Tunerstudio.

Also, please post more pictures of your LOCOST. Maybe some suspension pics since that seems to be interesting. And a pic of the ECU once you have it in hand- maybe one in the case, one with the top lid of the case removed. The top lid removed is likely going to be how you will be using it for the next few days.

https://www.efianalytics.com/register/browseProducts.jsp?ecuFamily=MegaSquirt&productCategory=Combos Get the "Tunerstudio MS & Megalogviewer MS" combo.
stefanst
contributor
contributor
Posts: 704
Joined: Wed Feb 17, 2016 12:24 am
Location: USA 08530

Re: Locost7 Bp4w-T

Post by stefanst »

Any recent progress?
Post Reply