[help needed] How to put the board together?

[LifeIs_Boost&Skids]

Hi!

I just joined the forum, and the community. I'm very interested in getting my hands dirty while learning how put together and program ECUs.
However I been looking through the forum for a while now and I couldn't find anywhere information of how to actually put the boards together. Is there any documentation of how exactly the board is set up?


Cheers.

[AndreyB]

Hello and welcome.

We do not have a basic step by step introduction to how to put the board together because the expectation is that one should be able to do that using only http://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenso_board and http://rusefi.com/forum/viewtopic.php?f=4&t=569

For instance http://rusefi.com/forum/viewtopic.php?f=4&t=569 points at https://svn.code.sf.net/p/rusefi/code/trunk/hardware/frankenso/frankenso_schematic.pdf which has all the info for someone with PCB assembly experience. Without such experience I am afraid it would be pretty hard to assemble one, at the moment less than 10% of the boards are assembled. For people not comfortable soldering a board together I recommend pre-assembled boards.