Hello from Spain

[ProfeAutomovilero]

Hello from Spain
First, sorry for my bad english.

Hello to all the world. I am a professor of school of auto mechanics in Spain.
In this school we have already adapted to a engine Opel Kadett Megasquirt MS3 this product was added to a and even Ford Ka another MS3 where students learn and understand the operation of the injection system.
I have known your web browsing by internet. And I have considered buying a Frankenso ... because it has a very large potential for teaching.
And how do you not? For that my students are able to expand and know . Also in the school we have engines EDC15 , common rail i , FSI.. To see if these engines can also be "modify" hoping that someone in the middle i unit purchase Frankenso … or of any idea or suggestion is welcome.

[kb1gtt]

Hello and welcome along.

Have you found the wiki? http://rusefi.com/wiki/index.php?title=Main_Page

Yeah! for teaching.

FSI and Common rail, you are poking me are you not I am also a fan of FSI and common rail. Do you know the injectors and their technology? I once made a QUCS simulation which would generate around an 80V spike for the initial opening voltage. See a post I did some years ago which is found here. http://rusefi.com/forum/viewtopic.php?f=2&t=231&start=6

I dream of putting a 4 cyl cummins 4BT common rail in my 95 Jeep Wrangler.

[ProfeAutomovilero]

A very quick reply…..
I think that you have to go step by step.
The first thing will be buying a Frankenso 0.2 Full Bundle and see how it works with the Ford Ka.
Can you advise/guide/ me the purchase of any product for more than the shop https://www.tindie.com/stores/russian/ ?
And then that students investigate to see what conclusions obtained.
Thxs

[AndreyB]

The first thing will be buying a Frankenso 0.2 Full Bundle

https://www.tindie.com/products/russian/frankenso-01-full-bundle/

Sold out since Jan 27, 2015

Unfortunately we are hobbyists here, so no stock of assembled boards. There would be assembled boards at some point in the future, but right now there is only https://www.tindie.com/products/russian/frankenso-02-diy-kit-/

[ProfeAutomovilero]

Ok perfect.

I explained to my students the plan and are motivated .
I have a few volunteers for your mount.
And I think that another will be encouraged to do so to your engine shortly

Bill of Materials to buy:
Frankenso 0.2 DIY KIT
brain board: with stm32f4discovery
LCD screen: 20x4 LCD screen
pigtail: used OEM~58 wire pigtail

Do you have any material to add to this everything ok ?

[AndreyB]

Do you have any material to add to this everything ok ?

You also need to have 0805 assorted resistors and capacitors. For example, http://www.ebay.com/itm/280952840955

There is also 'used OEM Mazda case: $55.00' unless you have to fabricate a cool transparent case