[info] Feature Requests - Feature Bounty Program

[Zeiss]

@Andrey and Matthew:

I would put $300 bounty at https://github.com/rusefi/rusefi/issues/3680

Plus:
– possibility to increase idle RPM, i.e. when AC is on
– possibility to temporary (depends of input state) increase RPM, I.e. when trany engages the gear ( change from N to D). It is something for Lua?

Thank you guys!

[mck1117]

@Andrey and Matthew:

I would put $300 bounty at https://github.com/rusefi/rusefi/issues/3680

Automatic or manual sync?

Plus:
– possibility to increase idle RPM, i.e. when AC is on

We already support adding more air, but not adding target RPM. Trivial enough to add.

– possibility to temporary (depends of input state) increase RPM, I.e. when trany engages the gear ( change from N to D). It is something for Lua?

Thank you guys!

I think we've already had other asks for P/N vs D idle control, so this is indeed one worth doing. You could also do it with Lua, but it seems like a common enough ask.

[Zeiss]

@Andrey and Matthew:

I would put $300 bounty at https://github.com/rusefi/rusefi/issues/3680

Automatic or manual sync?

Automatic, of course. Or a mix? Initial sync manual and then a kind of „keep air masses in sync“? Two MAFs and then balance the air mass, when the engine is warm and is idling, like the implementation of BMW/Bosch.

Plus:
– possibility to increase idle RPM, i.e. when AC is on

We already support adding more air, but not adding target RPM. Trivial enough to add.

This sounds very good! Something like „AC off = 600 rpm idle, AC on = 750 rpm idle“.

– possibility to temporary (depends of input state) increase RPM, I.e. when trany engages the gear ( change from N to D). It is something for Lua?

Thank you guys!

I think we've already had other asks for P/N vs D idle control, so this is indeed one worth doing. You could also do it with Lua, but it seems like a common enough ask.

Sounds very good! I think, here are two features. First one is „change from P/N to D“ (increase RPM) and the second one is „reduce torque during gear change“. BMW achieve this by retarding the ignition.

[mck1117]

Plus:
– possibility to increase idle RPM, i.e. when AC is on

We already support adding more air, but not adding target RPM. Trivial enough to add.

This sounds very good! Something like „AC off = 600 rpm idle, AC on = 750 rpm idle“.

wait, this is already done! We have a field "A/C target adder (RPM)" that will add some extra RPM when AC is turned on.

[Zeiss]

Perfect!

Where can I find this in TS.

[mck1117]

image.png (32.22 KiB) Viewed 29010 times

[Zeiss]

Thank you!

So, then $300 for trany stuff and ETB sync.

[AndreyB]

Where can I find this in TS.

Top-right corner of TS has search control! Took me 8 years to find out about that search feature. One day we shall add it on the rusEFI Online

[AndreyB]

I would love to pay $2000 for https://github.com/rusefi/rusefi/issues/4195

Just made a skeleton of unit test https://github.com/rusefi/rusefi/commit/564cec3ed25ef26625007a366ce1a1417b5c0b53 with some pointers - desired change should definitely include a test and well, not break existing tests

[mck1117]

I would love to pay $2000 for https://github.com/rusefi/rusefi/issues/4195

done: https://github.com/FOME-Tech/fome-fw/pull/479

[AndreyB]

done: https://github.com/FOME-Tech/fome-fw/pull/479

Nice!

Please PR into https://github.com/rusefi/rusefi to collect the bounty.

[mck1117]

PR

https://github.com/rusefi/rusefi/pull/6875

[AndreyB]

https://github.com/rusefi/rusefi/pull/6875

Thank you! You should have an email from Zelle!

[AndreyB]

I would love to pay $1500 for https://github.com/rusefi/rusefi/issues/6223

[AndreyB]

Something something EMI USB fatal error?

I would love to pay $300 not even for a fix but just for reproducible steps for getting any official rusEFI board hang up similar to https://github.com/rusefi/rusefi/issues/4310