rusefi.com

Posted: **Mon Oct 03, 2022 10:53 pm**

Proteus 0.7 has arrived from JLC without VNDL, TLS115 and high side switches. VNDL, TLS115 and high side switches were hand-soldered in NJ.

After failing output tests with LED board some heat/solder/rework was done. Once unit was powered after reword U1 got glowing red and smoke was released.

: image.png (575.08 KiB) Viewed 2195 times

Posted: **Mon Oct 03, 2022 11:44 pm**

some heat/solder/rework was done

what parts did we heat/solder/rework?

Posted: **Mon Oct 03, 2022 11:47 pm**

We are figting only with LS1 to LS16 and HS1 to HS4 since initial NJ soldering was very bad. TLS115 is also soldered in NJ but I believe not touched at the moment.

rusefi.com

Proteus U1 on fire

Proteus U1 on fire

Re: Proteus U1 on fire

Re: Proteus U1 on fire