Page 1 of 1
Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 9:19 pm
by nmstec
Promise to Andrey: I will make a SENT to CAN translator by May 1st. As he requested, will be a functional prototype. Bet you will be done by Monday.
If I do this, he will no longer question my timelines.
If I do not do this, I will no longer question his timelines.
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 9:20 pm
by mck1117
One idea is to read SPI at ~1mbit/s in to a buffer, then post-process it instead of trying to process edges in real time.
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 9:26 pm
by nmstec
- image.png (9.42 KiB) Viewed 12970 times
Please keep in mind that Mitchell is full of shit, and the "output" wire is actually SENT protocol.
Things I know: Contains TPS 1, TPS 2, TPS Overall.
Things I don't know: Speed, protocol, logic, Error handling.
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 9:31 pm
by nmstec
Better from 2022 Subrurban.
- image.png (12.45 KiB) Viewed 12968 times
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 9:45 pm
by AndreyB
Offtopic Tesla PCB porn
2016-2021 TESLA MODEL S Door Handle Controller Unit 1069651-00-E
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 9:51 pm
by nmstec
That module is NOT programmed, as it came straight from dealer, however I also have the harness to it, and the door handle somewhere... Still looking for the door handle. It has a 3 position hall sensor inside, working on SENT.
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 10:02 pm
by dbh97
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 10:28 pm
by nmstec
CRC - J2716-APR2016
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Fri Apr 15, 2022 11:04 pm
by AndreyB
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Sat Apr 16, 2022 12:46 am
by Abricos
AndreyB wrote: ↑Fri Apr 15, 2022 9:45 pm
Offtopic Tesla PCB porn
2016-2021 TESLA MODEL S Door Handle Controller Unit 1069651-00-E
5V0
HEART
BEAT
VBAT
Interesting
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Sat Apr 16, 2022 3:02 am
by nmstec
Andrey gave me till May 1st, I said by Monday (April 18th). I'd like to formally say I believe the more realistic timeline is 22nd of April.
Using the following excuses:
1. STM ain't my thang, so good excuse to learn on it. Target is STM32f429-144. If I take a ChinaBluePill, and put real F103 on it, may use that.
2. I ran out of all Atmel ARM based boards, don't even have a Due.
3. BeerMoney has hurt my feelings
Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Posted: Sat Nov 12, 2022 6:53 pm
by AndreyB