rusefi.com

https://github.com/rusefi/stim is the repo for special hardware used just for automated fabrication quality control.

https://github.com/rusefi/rusefi/wiki/dev-hardware-quality-control

Looking for feedback!

First board is https://github.com/rusefi/stim/blob/main/digital_inputs/gerber/digital_inputs.pdf

https://github.com/rusefi/stim/issues/6

the idea is to make a sandwich with a Nuckeo board in the middle.

I suck at reading other people's schematics. Can we have a feature list? What are the I/O? Capabilities?

stefanst wrote: ↑

Sun Jul 25, 2021 3:16 am

I suck at reading other people's schematics. Can we have a feature list? What are the I/O? Capabilities?

That first board is digital inputs board i.e. rusEFI injector/coil/H-bridge testing apparatus. Info added into https://github.com/rusefi/stim/blob/main/readme.md

rusEFI volume went up and I believe that JLC quality went down. Please welcome new iteration of QC board https://github.com/rusefi/stim

https://rusefi.com/docs/pinouts/stim/

Already on rev D https://github.com/rusefi/stim/tree/main/boards/digital_inputs-d

Very basic enclosure for 3D printing https://github.com/rusefi/stim/tree/main/enclosure