Page 1 of 1
GPS support / logging
Posted: Thu Apr 20, 2017 6:00 pm
by nighthunter
Hello everybody.
I have almost ready for etching my final PCBs and i want to ask, if there is any working GPS support/logging for rusefi?
Re: GPS support / logging
Posted: Thu Apr 20, 2017 8:56 pm
by AndreyB
On the one hand we have the code -
https://github.com/rusefi/rusefi/blob/master/firmware/hw_layer/neo6m.cpp
On another hand we have not touched it for a while. Give me a board with neo6m attached to a dedicated UART and I will fix GPS logging if it needs fixing
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: GPS support / logging
Posted: Thu Apr 20, 2017 9:28 pm
by nighthunter
I will test it, when the boards will be made. I have now I2C pins free, i will integrate 9DOF too. Hopefully sometimes this module will be supported to make some really profesional logs with acceleration etc...