rusefi.com

Hi!

I just joined the forum, and the community. I'm very interested in getting my hands dirty while learning how put together and program ECUs.
However I been looking through the forum for a while now and I couldn't find anywhere information of how to actually put the boards together. Is there any documentation of how exactly the board is set up?


Cheers.

Hello and welcome.

We do not have a basic step by step introduction to how to put the board together because the expectation is that one should be able to do that using only http://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenso_board and http://rusefi.com/forum/viewtopic.php?f=4&t=569

For instance http://rusefi.com/forum/viewtopic.php?f=4&t=569 points at https://svn.code.sf.net/p/rusefi/code/trunk/hardware/frankenso/frankenso_schematic.pdf which has all the info for someone with PCB assembly experience. Without such experience I am afraid it would be pretty hard to assemble one, at the moment less than 10% of the boards are assembled. For people not comfortable soldering a board together I recommend pre-assembled boards.