Toyota Supra 2jz-gte non-vvti plug and play uaefi
-
gurov
- Posts: 46
- Joined: Wed Feb 07, 2024 10:43 pm
- Location: nj
- Github Username: ggurov
- Slack: ggurov
- Contact:
Toyota Supra 2jz-gte non-vvti plug and play uaefi
it's a carrier board uaefi for the 120 pin non-vvti 2jz found on sc300, aristo, supra
1994 6speed supra turbo [ single turbo/1000cc ID/twin fuel pumps/bc2 262 cams ]. J&S safeguard for knock , UAEFI / 407 disco with rusefi / AEM EMS v2 / MS3pro PNP / Speeduino (mega2560 / teensy41 / stm32f411)
2020 BMW X3m - bootmod3 stage1
2020 BMW X3m - bootmod3 stage1
-
zazzn
- Posts: 5
- Joined: Tue Jan 21, 2025 6:15 pm
- Github Username: zazzn
Re: Toyota Supra 2jz-gte non-vvti plug and play uaefi
Wow!!
@gurov Where can I get my hands on one of these boards?
The UAEFI board seems limited on on I/O vs the MS3pro Module which is used in the MS3pro PNP that you had. (I have the same one, and I have another pro PNP for my 7m-gte)
How are you overcoming this? Are you using a can module to add extra I/O if so what are you using?
One thing that isn't clear is just exactly how many inputs are on the UAEFI board. On the webpage it states 2 TPS, 3 Analog Aux 2 analog thermistors
Does that mean that is 7 inputs since TPS is analog anyway on the 2jz along with the IAT, and CLT.
@gurov Where can I get my hands on one of these boards?
The UAEFI board seems limited on on I/O vs the MS3pro Module which is used in the MS3pro PNP that you had. (I have the same one, and I have another pro PNP for my 7m-gte)
How are you overcoming this? Are you using a can module to add extra I/O if so what are you using?
One thing that isn't clear is just exactly how many inputs are on the UAEFI board. On the webpage it states 2 TPS, 3 Analog Aux 2 analog thermistors
Does that mean that is 7 inputs since TPS is analog anyway on the 2jz along with the IAT, and CLT.