Hi I'm Steve and I'm going to be running my obd1 honda sohc d16z6 in my 93 civic
Posted: Tue Feb 27, 2024 7:21 pm
As the intro says I'm Steve and I'm going to be running the uaefi on the engine in my 93 honda civic ex with a d16z6 sohc vtec engine.
It is running obd1. I rebuilt the engine with a skunk2 camshaft, cp forged pistons and Manley forged rods. It is boosted with a comp turbo oiless ctr2871s ball bearing turbo and an og greddy bov.
I have been messing with diy efi for some years building multiple speeduino ecu's and have been working with tunerstudio ultamate for a few years. I recently ordered a uaefi board to try out as it has more inputs ie. Onboard wideband and egt and a faster processor in a smaller package. I will be wiring it to a honda obd1 breakout board for a plug and play setup with the factory harness.
I have an aem stainless 3.5bar map sensor and the rest are honda sensors besides the aem x series wideband I have in the car will be wiring in sensor to the ecu as soon as I get it. Any tips would be greatly appreciated.
It is running obd1. I rebuilt the engine with a skunk2 camshaft, cp forged pistons and Manley forged rods. It is boosted with a comp turbo oiless ctr2871s ball bearing turbo and an og greddy bov.
I have been messing with diy efi for some years building multiple speeduino ecu's and have been working with tunerstudio ultamate for a few years. I recently ordered a uaefi board to try out as it has more inputs ie. Onboard wideband and egt and a faster processor in a smaller package. I will be wiring it to a honda obd1 breakout board for a plug and play setup with the factory harness.
I have an aem stainless 3.5bar map sensor and the rest are honda sensors besides the aem x series wideband I have in the car will be wiring in sensor to the ecu as soon as I get it. Any tips would be greatly appreciated.