Hi all. I have a Subaru Impreza 2007 (MY 08) 2.0 150 hp.
In fact there was about 130-135 hp only.
So firt I modified engine to +/- 190 hp making engine rebuild (CR increased from 10,2 to 11
head porting, Ex camshafts replace to stock Legacy 165 hp, selfmade short intake manifold)
I replace stock Ecu Hitachi to Wrx08 Denso. It takes about 8 mounth total.
Then I overbore block (using my own sleevs) to 100mm , install 2,5 l crankshaft and make 2,5 l EJ 254
With stock intake and Kelford 272 deg. cam's I make 170 whp@6550 rpm
Photos will be later.
Subaru Impreza MY08 2,5
Subaru Impreza MY08 2,5
Skype- max.mad486
Re: Subaru Impreza MY08 2,5
Yes Photo's please. I have similar, so I'm interested in how you get on with your project.
Welcome to the friendlier side of internet crazy
Re: Subaru Impreza MY08 2,5
Here you are:
EJ204 boring
Installed sleevs
Assembled engine
Dynograph on wheels:
Higher power without intake (engine works on MAP, MAF disconnected)
That's my car:
EJ204 boring
Installed sleevs
Assembled engine
Dynograph on wheels:
Higher power without intake (engine works on MAP, MAF disconnected)
That's my car:
Skype- max.mad486