Hotboi Drift Car Marketing Project
Posted: Wed Aug 24, 2022 2:20 pm
I have wanted to do ITBs for a VERY long time. Recently i was looking into it again and found the E-ITB from 2017-19 CBR1000rr. As soon as i found it, i bought it. Its the perfect combo for a marketing project for Hellen Miata. Cool points of ITB and showing off that we are the only pnp that supports it. It will be receiving lots of polish in the engine bay. Part of the cleanup will be the change to Volvo Electronic Power Steering pump. There will be livery in the near future as well.
Here is the subject in question. 2001 with hotboi kit, wheels, BC coils and angle kit. Bone stock powertrain. I took it out to an event shortly after buying it.
The throttles and test fitting with a printed manifold.
Bench test rig and the Billet manifold
Trying out a Merc remote mount PPS in an attempt to maintain cruise.
Using a Volvo electronic over hydraulic pump
Here is the subject in question. 2001 with hotboi kit, wheels, BC coils and angle kit. Bone stock powertrain. I took it out to an event shortly after buying it.
- IMG_9259.jpg (2.83 MiB) Viewed 5329 times
- IMG_9178.jpg (2.15 MiB) Viewed 5329 times
The throttles and test fitting with a printed manifold.
- IMG_9614.png (1.09 MiB) Viewed 5329 times
- IMG_9736.jpg (1.43 MiB) Viewed 5329 times
Bench test rig and the Billet manifold
- IMG_9390.jpg (1.57 MiB) Viewed 5329 times
- IMG_9791.png (1.83 MiB) Viewed 5329 times
- IMG_0177.jpg (185.69 KiB) Viewed 5329 times
- IMG_0178.jpg (176.78 KiB) Viewed 5329 times
Trying out a Merc remote mount PPS in an attempt to maintain cruise.
- IMG_0132.jpg (1.11 MiB) Viewed 5329 times
Using a Volvo electronic over hydraulic pump
- IMG_0029.png (2.44 MiB) Viewed 5329 times