1996 Mazda Miata M Edition
Posted: Fri Apr 22, 2022 5:43 pm
Under duress from @beermoneymotorsports I'm forced to make a build thread for the Miata project. Since the car is "finished" (lol) I'll be starting with that and a few highlights then maybe expand from there.
1996 Mazda Miata "M Edition"
1.8 with .020 overbore
Supertech pistons (9.5:1)
Manley rods
Wiseco rings
Boundary oil pump
ACL bearings
ARP studs
Kraken manifold and 3" exhaust
Pulsar GTX2871R
Bosch 68mm ETB
3bar TMAP sensor
Originally built with Proteus 0.3 using a homemade adapter harness
Currently running Hellen PNP for 1996 Miata from @beermoneymotorsports with microrusefi 0.1 as an additional sensor control module
There's a lot going on with this car, and I'm sure I've missed a lot so if anyone cares to know more let me know and I'll update the thread.
1996 Mazda Miata "M Edition"
1.8 with .020 overbore
Supertech pistons (9.5:1)
Manley rods
Wiseco rings
Boundary oil pump
ACL bearings
ARP studs
Kraken manifold and 3" exhaust
Pulsar GTX2871R
Bosch 68mm ETB
3bar TMAP sensor
Originally built with Proteus 0.3 using a homemade adapter harness
Currently running Hellen PNP for 1996 Miata from @beermoneymotorsports with microrusefi 0.1 as an additional sensor control module
There's a lot going on with this car, and I'm sure I've missed a lot so if anyone cares to know more let me know and I'll update the thread.