rusefi.com

Posted: **Fri Oct 02, 2020 6:31 am**

I have a 250cc 4cylinder that can do 19,000rpm. I have been looking at different solutions, but they struggle with the slightly higher RPM. I'd really love to efi the bike. I would 3d print the intakes, or just convert the existing carbs to throttle bodies.

But the real issue is the RPM. Can something like a MRE handle this?

Regards

Nathan

Posted: **Fri Oct 02, 2020 11:09 am**

Yes, rusEFI can absolutely handle 20K RPM.

Posted: **Fri Oct 02, 2020 7:40 pm**

With the caveat that it's a good idea to use a wheel with a smaller number of teeth (12-1 would be great), yes, 20k RPM isn't a problem. A 60-2 wheel at 20k would be a challenge, but 12-1 or even 24-1 shouldn't be an issue.

rusefi.com

Hi there from New Zealand. Wonderinf if Rusefi can manage my motorcycle

Hi there from New Zealand. Wonderinf if Rusefi can manage my motorcycle

Re: Hi there from New Zealand. Wonderinf if Rusefi can manage my motorcycle

Re: Hi there from New Zealand. Wonderinf if Rusefi can manage my motorcycle