rusefi.com

So I'm looking to use a Frankenso to run and tune my SR20DET in my S13. One of the things I'm trying to figure out is the CAM angle Sensor and how to measure/find whether it will work with the Frankenso.

Hey there!

Trigger should not be a problem - we have https://rusefi.com/wiki/index.php?title=Manual:Software:Trigger#Nissan

I believe noone got the full 360 slots working/tested yet - but I am confident it would work as well.

The redtop SR20DET uses the 360/4,8,12,16 wheel i.e. 360 uniform outer and 4 unique inner. What info would you need to help make it work?

https://rusefi.com/wiki/index.php?title=Manual:Software:UnknownTrigger has some info on how we add new triggers. Short version - it's easy once there is someone with rusEfi hardware wired to a car which could be cranked with starter.

Well I don’t have the Frankenso yet, I have quite a bit of soldering skill but not very much experience with smd soldering. I was going to pick up the kit but kind of worried about screwing it up (don’t have enough money for the assembled version) lol.

As someone who assembled the kit version, I suggest you save up for the fully assembled. It took me months to assemble. While I appreciate the skills I learned doing so, it's not something I would recommend as a first smd project.

Yeah that’s probably what I’m gonna do, I would hate to spend a month soldering only to find out it doesn’t work and then have to troubleshoot what went wrong