Hello everyone,
I am in Australia. I enjoy using Tuner Studio and have done quite a few MS2 and other EFI conversions. I am still a mechanic at age, 57.
My current project is a V8 to run with wasted spark and batch fired injection in time with ignition table. I hope to use at least 1 knock sensor and 1 wideband O2 in closed loop. Also I want to use the GM 4 wire IAC.
Am I on the right track with RusEfi and Tuner Studio, please?
I use Dynosim 6 and Pipemax simulation software to write base starting maps which I have tested and proven, also.
Thank you.
V8 wasted spark with 4 wire IAC
-
AndreyB
- Site Admin
- Posts: 14727
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: V8 wasted spark with 4 wire IAC
https://github.com/rusefi/rusefi/wiki/Hardware
https://github.com/rusefi/rusefi/wiki/knock-sensing
I believe that as of today Proteus is your way forward with rusEFI. I should be able to ship https://www.ebay.com/itm/rusEFI-Proteus-0-4-standalone-ECU/333811680319 in about 2 weeks.
https://github.com/rusefi/rusefi/wiki/knock-sensing
I believe that as of today Proteus is your way forward with rusEFI. I should be able to ship https://www.ebay.com/itm/rusEFI-Proteus-0-4-standalone-ECU/333811680319 in about 2 weeks.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute