[rusEfi] 1996 Dodge RAM 1500 V8 (#15)

[AndreyB]

Jared, can you post a two minute log of engine not running on your truck? Maybe with ExpAverage=0 and ExpAverage=0.3333?

ExpAverage is defined on the bottom of Analog Inputs dialog.

[erikmag]

What is the configuration used for crankshaft and distributor synchronization?



this conf its correct?

[AndreyB]

Hard to read the scaled-down image but I believe we have "Dodge Ram 1+16" option in that drop-down.

[34blazer]

Back from the dead I see.

What's the news with this situation? SCT is now mandating training to use the software, and SET is the only other company that offer tuning support for the JTEC Rams.

Last year I started to convert my 97 SS/T to GM OBD1, and using a Northstar ignition. Project stalled within a weekend of finishing due to finding another car to tinker with. Now I've acquired another Ram and I'm not looking forward to using SCT or SET. HP tuners promised software years ago but still nothing. Maybe you guys could be the bridge the open source side of it for our trucks.

[kb1gtt]

I still have the ram, but have not done any development with the transmission control stuff. My key problem is a lack of time for turning wrenches.