I am posting a solution for compatibility of UAEFI and the KORTOMETR display.
You just need to flash KORTOMERT with the attached firmware and set the settings as attached.
There is one problem I noticed - incorrect display of CLT temperature. But this can be neglected.
The KORTOMETR display firmware is provided by the author of the device, posted with his consent.
https://www.kortometer.ru/ instructions for updating on the manufacturer's website.
UAEFI + Kortometr Dash
-
Philippov_khv
- Posts: 3
- Joined: Thu May 01, 2025 12:13 am
UAEFI + Kortometr Dash
- Attachments
-
- CAN.jpg (75.73 KiB) Viewed 6593 times
-
- KORTOMETR.jpg (36.93 KiB) Viewed 6594 times
-
- Kortometr_UAEFI.zip
- (153.3 KiB) Downloaded 1781 times
-
Dron_Gus
- contributor
- Posts: 479
- Joined: Wed Nov 13, 2013 1:11 pm
- Location: S-Pb
- Github Username: dron0gus
Re: UAEFI + Kortometr Dash
Thanks!
As far as I understand from whatsup chat the main problem is that RusEFI sends multibyte fields in incorrect endian?
As far as I understand from whatsup chat the main problem is that RusEFI sends multibyte fields in incorrect endian?