Page 1 of 1

Batt Lag Error

Posted: Fri May 17, 2024 12:45 am
by lsvtec
Can anyone shed some insight on this error? I was tuning the car fine just yesterday, and today when attempting to plug in, and do a cold start, I got this error message.

I pulled the ECU from the car, and brought it inside, and connected to the computer, and same error is happening?

https://rusefi.com/online/view.php?msq=1655

Re: Batt Lag Error

Posted: Fri May 17, 2024 12:51 am
by AndreyB
image.png

Re: Batt Lag Error

Posted: Fri May 17, 2024 1:03 am
by lsvtec
AndreyB wrote:
Fri May 17, 2024 12:51 am
image.png
I am not sure where to look for the Batt Lag (?setting/table?) to make sure it is ascending? I wasn't having this issue yesterday weirdly enough so it is odd. I've no clue where to look in the settings to correct this. May be a silly mistake, I just don't know where to start to look ~

Re: Batt Lag Error

Posted: Fri May 17, 2024 1:15 am
by lsvtec
OK figured it out. On injector dead time setting's I had placed two values of voltage at 16 which was incorrect (regarding the dead times that were reported by fuel injector manufacturer, up to voltage of 16 was used so that's why I placed two). I just removed one "16" and replaced it with "16.5" in ascending order.

Sorry for the confusion haha. Appreciate the help!