rusefi.com

MicroRusEFI PNP 0.2 for NB2 Miata VVT

Hello, I have a older board on a NB2 VVT miata. Can someone help me get it up and running? I've setup the parameter as best as I can, it still doesn't start. Can someone check out my tune to see what setting is wrong? Or is there a base tune I can used? I'm pretty new to this.

Here is link to the tune:
https://rusefi.com/online/view.php?msq=925

It a stock Miata NB2 with VVT using stock MAF sensor.
Everything is pretty much stock, I wanted to make sure it works before doing any modifications.

I will upload cranking datalog in a few minutes

At the moment your unit has firmware from a year and a half ago. Realistically your first step is to upgrade to fresh release.

See https://github.com/rusefi/rusefi/wiki/HOWTO-quick-start

We also have https://rusefi.com/online to make tune and log file sharing easier for all parties involved. Please upload both tune and log once you have fresh firmware https://github.com/rusefi/rusefi/wiki/HOWTO-upload-tune

HyperSpeedMedia wrote: ↑

Tue Mar 22, 2022 6:00 pm

It a stock Miata NB2 with VVT using stock MAF sensor.
Everything is pretty much stock, I wanted to make sure it works before doing any modifications.

Your tune says "Speed Density" which is MAP, that contradicts your MAF plan

https://rusefi.com/online/view.php?msq=925&dialog=engineChars

Ahh..thanks, let me try that

Updated... finally up and running. Thanks

Time for fresh firmware

Pleaaaaaase provide photos, vids, and put your log on Rusefi.com/online

All of this helps to make Rusefi better for you.

AndreyB wrote: ↑

Tue Mar 22, 2022 11:43 pm

Time for fresh firmware

Hello AndreyB, how do I konw what board I have to upgrade the firmware? There is a 0.2 in the bottom. Thanks

duhafnusa4 wrote: ↑

Tue Mar 22, 2022 11:44 pm

Pleaaaaaase provide photos, vids, and put your log on Rusefi.com/online

All of this helps to make Rusefi better for you.

I'm working on a video tonight, will post it up soon.
Thanks

Finally up a video up.
Here's the link for install and first startup.
https://www.youtube.com/watch?v=BQk3PkOk3eM

HyperSpeedMedia wrote: ↑

Thu Mar 24, 2022 12:51 am

Hello AndreyB, how do I konw what board I have to upgrade the firmware? There is a 0.2 in the bottom. Thanks

That's a https://github.com/rusefi/rusefi/wiki/MREAdapter72 adapter soldered onto microRusEFI F4

So it's microRusEFI F4 firmware for this unit

AndreyB wrote: ↑

Thu Mar 24, 2022 1:29 am

HyperSpeedMedia wrote: ↑

Thu Mar 24, 2022 12:51 am

Hello AndreyB, how do I konw what board I have to upgrade the firmware? There is a 0.2 in the bottom. Thanks

That's a https://github.com/rusefi/rusefi/wiki/MREAdapter72 adapter soldered onto microRusEFI F4

So it's microRusEFI F4 firmware for this unit

Thanks alot for all your help...!!!!