rusefi.com

How is the code on the ESP looking? I think I am doing smth. wrong there.

I only get around 5-10 /sec. data rate with wifi... I am using the new FW for it- so that's not the point.

Thanks!

Hi guys,

is here anyone running Rusefi with an ESP32 chip to make wifi connection possible?


I am currently having issues, getting it running with over 5-10 data/seconds.

Thanks!

Thanks Andrey,

so in general there is interest?

Hi guys, for my recent project I`m in the need of staged injection. The problem? My programming skills aren't that high :) . So I am looking for enthusiasts, that maybe tried some code modifications to get it running- and maybe get it running together! Overall Staged injection offers a lot for tuner...

Hey guys,

is there a way to implement staged injection to the firmware? I am currently trying to research- but I can't find that much.

It is needed for that project

Thanks guys!

AndreyB wrote: ↑

Mon Dec 18, 2023 3:44 pm

https://github.com/rusefi/uaefi is still the answer to your question, documentation was improved since I've posted it previously

Thanks Andrey, I will have a look!!

AndreyB wrote: ↑

Mon Dec 18, 2023 1:08 am

CJ125

Hey Andrey,

Yeah- I saw that post. Is there any other possibility in using an onboard Lambda controller? I tried the search function, but am not really sure about it.

Or is an external the way to go?

Thanks for that input!

Mechanical TPS wear is a common issue. As an example Benelli motorcycles show strange behavior when TPS is not properly calibrated. Building a solution for end users requires a simple TPS recalibration procedure without additional investment into TunerStudio or similar software. I've encountered li...

Hey guys, is there any chance by chaning the fw to set tps without tunerstudio? So lets say the flags are: ECU powered Engine not running tps 3 times WOT to closed (snap the throttle) = get the current closed tps value as 0% The original ecu can do this when you plugin a delivered dongle that powers...

Thanks mate! I will for sure need some help, when it keeps to rund the firmware. Is there anything already running on a twostroke with crankcase pressure sensor sampling? An example would be great! Currently I am struggeling a bit on which FW I should choose- is there any yt "how to" for d...

Hey Andrey,

The bike comes with the cmc 64 Pin molex style connector.
The stock ecu: Continental M4C.

Bike overall is awesome, just the power is so down to earth The carby models had around 40ish hp- these tbi bikes only produce around 34-35 from stock....

Thanks for the fast replies, Andrey! :) So I got the bike running with a standalone ecu- Emu Black and Maxecu. But now I want to go my own way. So basically I know how to get that engine running- and now I want to build it smaller and plug and play. I did not try it with a rusefi ECU yet- just becau...

Hey Andrey, I am going the "harder" way, because I want to use the existing oem wiring harness and plug. The problem is the space under the seat at all- there is only space for around 150x100mm. So I am going to print a case, that fits under the seat- just like oem :). I thought, that I ne...

Hello guys, i am planning on building a STM32F407VGT6 based twostroke efi controller. The bike where this should be testet will be a KTM SX 125 2023 model- that already comes with an efi oem. So everything that is needed for the hardware besides the ecu it self (I have a guru currently designing the...

Hi guys, I know it's been a while...But is there anything new in this project? I want to convert my sx125 TBI to a standalone ST32 project that runs with rusefi FW. What I think will be a big issue on this small bike is the mapsensor sampling. The original ecu does this 2 times per cycle and takes t...