Polaris is more or less the same thing, just totally different.
53 inches seems to be the perfect length if you need to do the same.
Search found 14364 matches
- Mon May 27, 2024 10:47 pm
- Forum: You and your build
- Topic: 2022 Canam
- Replies: 5
- Views: 22646
- Mon May 27, 2024 10:45 pm
- Forum: You and your build
- Topic: 2011 Nissan Xterra
- Replies: 45
- Views: 23182
Re: 2011 Nissan Xterra
TCU protocol reverse engineering progress: I think I've located numeric torque reduction request byte, green on the chart
Also random link https://nissanecu.miraheze.org/wiki/Nissan_Tuning
Also random link https://nissanecu.miraheze.org/wiki/Nissan_Tuning
- Mon May 27, 2024 4:29 pm
- Forum: User Support
- Topic: Incorrect Number of Sparks during 12-1 Trigger
- Replies: 1
- Views: 44
Re: Incorrect Number of Sparks during 12-1 Trigger
Without knowing engine phase engine is running in wasted spark mode.
Welcome to the forum!
Welcome to the forum!
- Sat May 25, 2024 12:54 am
- Forum: Dev: Software
- Topic: Transmission Control logic
- Replies: 61
- Views: 57178
Re: Transmission Control logic
Well, that kinda works David says: Any 8 or 10 speed is going to be a clutch-to-clutch transmission, which is very much not supported currently. Oversimplification: A clutch-to-clutch transmission has a solenoid for each clutch, including torque converter clutch. An old fashioned transmission has s...
- Tue May 21, 2024 2:27 am
- Forum: You and your build
- Topic: 2021 Acura RDX
- Replies: 4
- Views: 1689
Re: 2021 Acura RDX
Active Dumper System, the less fancy one without stroke sensors like on Civic Type R.
Why do they run two dedicated wires to each strut solenoid? Why not shared high side?
Why do they run two dedicated wires to each strut solenoid? Why not shared high side?
- Fri May 17, 2024 12:51 am
- Forum: Tuning Support: Making it Run
- Topic: Batt Lag Error
- Replies: 3
- Views: 360
- Wed May 15, 2024 11:27 pm
- Forum: Tuning Support: Making it Run
- Topic: Honda OBD1 Turbo LSVTEC Progress
- Replies: 1
- Views: 197
Re: Honda OBD1 Turbo LSVTEC Progress
Appreciate the write up!
- Wed May 15, 2024 2:34 am
- Forum: You and your build
- Topic: 99 Honda VFR800, PnP ECU NOW turbo EVENTUALLY
- Replies: 49
- Views: 36947
Re: 99 Honda VFR800, PnP ECU NOW turbo EVENTUALLY
coolantbongrips wrote: ↑Wed May 15, 2024 2:19 amIs there an official value for this resistor, or does it have to be found through experimentation?
https://github.com/rusefi/uaefi/issues/65
- Tue May 14, 2024 11:29 pm
- Forum: User Support
- Topic: rusEfi into Corvette C4 1984 CFI
- Replies: 1
- Views: 155
Re: rusEfi into Corvette C4 1984 CFI
Добрый вечер let me recommend https://github.com/rusefi/rusefi/wiki/Discord
- Tue May 14, 2024 2:43 am
- Forum: You and your build
- Topic: Proteus f7 in s52"tu" turbo swapped 318ti
- Replies: 1
- Views: 900
Re: Proteus f7 in s52"tu" turbo swapped 318ti
Zero relation between vvt outputs and sycn.
Please https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF#log-it and https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF#share-it
Please https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF#log-it and https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF#share-it
- Mon May 13, 2024 10:44 pm
- Forum: Dev: Software
- Topic: SENT J2716 Protocol
- Replies: 40
- Views: 36667
Re: SENT J2716 Protocol
TODO support MAF sensors like 04E906051 see https://github.com/rusefi/rusefi-hardware/issues/146
- Mon May 13, 2024 10:21 pm
- Forum: Tuning Support: Making it Run
- Topic: Honda obd1 vtec
- Replies: 6
- Views: 444
Re: Honda obd1 vtec
Yes but you would have to use "blend" tables feature - it's powerful but complicated.
- Sun May 12, 2024 6:23 pm
- Forum: Tuning Support: Making it Run
- Topic: Honda obd1 vtec
- Replies: 6
- Views: 444
Re: Honda obd1 vtec
VE is insane, that often means that injector dead times are wrong.
- Sun May 12, 2024 6:22 pm
- Forum: Tuning Support: Making it Run
- Topic: Honda obd1 vtec
- Replies: 6
- Views: 444
Re: Honda obd1 vtec
let me point you at part of your tune responsible for VTEC control https://rusefi.com/online/view.php?msq=1652&dialog=gppwm1
- Sun May 12, 2024 5:04 pm
- Forum: Tuning Support: Making it Run
- Topic: Honda OBD1 Trigger Settings/Timing Drift Issue
- Replies: 5
- Views: 311
- Sun May 12, 2024 4:17 pm
- Forum: Tuning Support: Making it Run
- Topic: Honda OBD1 Trigger Settings/Timing Drift Issue
- Replies: 5
- Views: 311
Re: Honda OBD1 Trigger Settings/Timing Drift Issue
It has a 24 tooth wheel for the trigger rpm signal in the distributor and another wheel that has 4 teeth for sync. Would it be safe to assume that you did not hit "OBD1" preset and probably have wrong trigger setup? See also https://github.com/rusefi/rusefi/wiki/All-Supported-Triggers#12-...
- Sun May 12, 2024 4:15 pm
- Forum: Tuning Support: Making it Run
- Topic: Honda OBD1 Trigger Settings/Timing Drift Issue
- Replies: 5
- Views: 311
- Thu May 09, 2024 5:01 pm
- Forum: You and your build
- Topic: 2021 Acura RDX
- Replies: 4
- Views: 1689
Re: 2021 Acura RDX
Hold on, does this vehicle have THREE separate CAN buses?!
https://github.com/rusefi/rusefi_documentation/blob/master/OEM-Docs/Honda/2021-Acura-RDX-data-lines.pdf
Power steering uses one bus but electronic gear shifter uses two? Two buses between ECU and ECU?
https://github.com/rusefi/rusefi_documentation/blob/master/OEM-Docs/Honda/2021-Acura-RDX-data-lines.pdf
Power steering uses one bus but electronic gear shifter uses two? Two buses between ECU and ECU?
- Thu May 09, 2024 4:43 pm
- Forum: You and your build
- Topic: 2021 Acura RDX
- Replies: 4
- Views: 1689
2021 Acura RDX
Many years ago I had a not so bright orange vehicle with a Honda K engine. It has blown the head gasket for not good reason :( So I've decided to purchase a bright orange vehicle, again with Honda K engine, this time GDI and turbo-charged! And Acura Care Extended Warranty :) WhatsApp Image 2024-05-0...
- Mon May 06, 2024 10:07 pm
- Forum: User Support
- Topic: subaru gt turbo uaefi
- Replies: 18
- Views: 2649
Re: subaru gt turbo uaefi
it's usually one resistor away working, just an open question if that's a pull-up or a pull-down and what value maybe try a few combinations?
are you trying low side or high side output?
Consider asking at the rusEFI discord server
are you trying low side or high side output?
Consider asking at the rusEFI discord server
- Mon May 06, 2024 9:35 pm
- Forum: You and your build
- Topic: 1998 BMW V12 engine M73 #55
- Replies: 144
- Views: 138983
Re: 1998 BMW V12 engine M73 #55
this has definitely turned to be way more work than I anticipated
- Sat May 04, 2024 4:31 pm
- Forum: Dev: Software
- Topic: Software knock processing
- Replies: 70
- Views: 86715
Re: Software knock processing
Alexey @vag0dr04er has contributed _something_ - right now it's available in Proteus firmware, let me see if I can also enable it for 4chan and uaefi
https://github.com/rusefi/rusefi/pull/6467
https://github.com/rusefi/rusefi/pull/6467
- Sat May 04, 2024 1:24 pm
- Forum: You and your build
- Topic: Sporttrike 1.8l Toyota 1ZZ-FE [microRusEFI]
- Replies: 71
- Views: 107895
Re: Sporttrike 1.8l Toyota 1ZZ-FE [microRusEFI]
Any MAP and throw MAF away. Bosch 4 pin TMAPs with integrated IAT are a popular option
rusEFI has "ford/toyota" redundant TPS and PPS modes that's what you are looking for
What if your oil pressure sensor breaks while you are turning? You would have to use Lua for this safety feature.
rusEFI has "ford/toyota" redundant TPS and PPS modes that's what you are looking for
What if your oil pressure sensor breaks while you are turning? You would have to use Lua for this safety feature.
- Thu May 02, 2024 6:46 pm
- Forum: Dev: Hardware
- Topic: rusEFI in Arduino Mega2560 form-factor - megaefi - speeduino / rusefi mashup
- Replies: 1
- Views: 1400
- Thu May 02, 2024 5:54 pm
- Forum: Dev: Software
- Topic: How to compile the firmware
- Replies: 141
- Views: 1124817
- Wed May 01, 2024 10:18 pm
- Forum: Dev: Hardware
- Topic: F103 dual channel wideband controller + EGT + 2 x AUX In + 2 Aux out
- Replies: 87
- Views: 175169
Re: F103 dual channel wideband controller + EGT + 2 x AUX In + 2 Aux out
https://github.com/rusefi/rusefi/commit/ec50d034bc858a3e34f327df0058912d3710e171 looks like rusEFI is gaining ability to actually use those aux outputs? And maybe those aux inputs soon?
- Tue Apr 30, 2024 2:21 pm
- Forum: Dev: Hardware
- Topic: uaEFI Ultra Affordable EFI
- Replies: 17
- Views: 47907
Re: uaEFI Ultra Affordable EFI
probably, whatever is the default.Atlantis2013 wrote: ↑Tue Apr 30, 2024 11:10 amwhat is the copper weight for inner and outer ? both 1oz ?
- Tue Apr 30, 2024 1:32 am
- Forum: Dev: Software
- Topic: BEAN protocol
- Replies: 6
- Views: 8730
Re: BEAN protocol
dropped.
it would take a suitcase of small denomination dollar bills to get this on top of the priority list
it would take a suitcase of small denomination dollar bills to get this on top of the priority list
- Sun Apr 28, 2024 11:57 pm
- Forum: Dev: Hardware
- Topic: Micro vs uaefi
- Replies: 14
- Views: 16490
Re: Micro vs uaefi
Yes, it comes with a crimp kit
- Sun Apr 28, 2024 5:31 pm
- Forum: Dev: Hardware
- Topic: Microrusefi
- Replies: 1
- Views: 1256
Re: Microrusefi
yes microRusEFI can drive 4 wire idle air valves see setting at https://github.com/rusefi/rusefi/pull/3749
Added to https://github.com/rusefi/rusefi/wiki/Hardware-microRusEFI#faq
Added to https://github.com/rusefi/rusefi/wiki/Hardware-microRusEFI#faq