Search found 18 matches
- Thu Dec 14, 2023 8:54 pm
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 648079
Re: Wideband Controller: Fully Custom, no ASIC!
i hope not but i will check
- Mon Dec 11, 2023 12:49 am
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 648079
Re: Wideband Controller: Fully Custom, no ASIC!
also im facing an issue two brand new sensors on a a proteus reads backwards !
it sits at 10.0 afr at free air and when i hit it with butane it goes to 29
it sits at 10.0 afr at free air and when i hit it with butane it goes to 29
- Sat Dec 09, 2023 11:35 pm
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 648079
Re: Wideband Controller: Fully Custom, no ASIC!
is there any prebuilt binary that will run the module and carrier as a standalone without the need of rusefi ?
i got 3 pieces here laying around and i would love to use them on my Dyno ( yourdyno ) or some Ms based ecus i have spare
i got 3 pieces here laying around and i would love to use them on my Dyno ( yourdyno ) or some Ms based ecus i have spare
- Wed May 17, 2023 4:54 pm
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 648079
Re: Wideband Controller: Fully Custom, no ASIC!
so... with an stlink it uploads fine and it works ... no idea why it wont work via DFU
- Tue May 16, 2023 7:22 pm
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 648079
Re: Wideband Controller: Fully Custom, no ASIC!
the best i managed to to is to get an error from stm qube 22:16:51 : Download in Progress: 22:16:52 : Error: Write failed at address: 0x8001800 22:16:52 : Error: failed to download Segment[0] 22:16:52 : Error: failed to download the File and the wideband flashes the leds quickly when powered up and ...
- Tue May 16, 2023 4:35 pm
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 648079
Re: Wideband Controller: Fully Custom, no ASIC!
so i got 5 of them made https://github.com/mck1117/wideband/tree/master/hardware/board_module/export/rev%20B
but im stuck with the firmware im not able to find the binary for the modules in order to upload it on them am i missing something ? or i am that blind ?
but im stuck with the firmware im not able to find the binary for the modules in order to upload it on them am i missing something ? or i am that blind ?
- Wed Aug 31, 2022 1:09 pm
- Forum: Tuning Support: Making it Run
- Topic: rusEFI professional tuners
- Replies: 13
- Views: 26604
- Thu Aug 18, 2022 7:36 pm
- Forum: You and your build
- Topic: Vitara 1.6 8v
- Replies: 10
- Views: 7155
Re: Vitara 1.6 8v
setting the trigger type to Mazda SOCH 4
reads rpm on cranking with out sync loss
i havet started the car yet still need to modify the intake to fit the injector rail and make a turbo manifold for it
reads rpm on cranking with out sync loss
i havet started the car yet still need to modify the intake to fit the injector rail and make a turbo manifold for it
- Wed Aug 17, 2022 12:27 pm
- Forum: You and your build
- Topic: Vitara 1.6 8v
- Replies: 10
- Views: 7155
Re: Vitara 1.6 8v
cant install a new injector unfortunately its a single point throttle body injector
the idea is to run it as is just to see that everything works
and then fit a saxo fuel rail that seems like it fits and convert it to port injection and slap a turbo on it
the idea is to run it as is just to see that everything works
and then fit a saxo fuel rail that seems like it fits and convert it to port injection and slap a turbo on it
- Tue Aug 16, 2022 9:15 am
- Forum: You and your build
- Topic: Vitara 1.6 8v
- Replies: 10
- Views: 7155
Re: Vitara 1.6 8v
i was under the impression that it needs a peak and hold driver
- Mon Aug 15, 2022 10:54 pm
- Forum: You and your build
- Topic: Vitara 1.6 8v
- Replies: 10
- Views: 7155
Re: Vitara 1.6 8v
also any easy way to drive the injector ?
its a Low z type 8ohms as autodata says
its a Low z type 8ohms as autodata says
- Mon Aug 15, 2022 3:31 pm
- Forum: You and your build
- Topic: Vitara 1.6 8v
- Replies: 10
- Views: 7155
Re: Vitara 1.6 8v
is the dissy trigger patter supported ? What trigger pattern? Need more info :) from what i can understand its an even 4 pulse trigger probably a 5v hall sensor looks easy to modify and put a 24-1 in and run it as a missing tooth cam speed if this one is not supported all the wires i scoped tho i c...
- Mon Aug 15, 2022 12:35 pm
- Forum: You and your build
- Topic: Vitara 1.6 8v
- Replies: 10
- Views: 7155
Re: Vitara 1.6 8v
usually before tuning car we check ignition with timing and check if trigger wheel decoding correctly?! :D Who tuned what ? ;) all i did is throw the car on the Dyno ... plus i tune cars for living so dont worry about it all i asked if ithas been done allready is the dissy trigger patter supported ...
- Sun Aug 14, 2022 6:05 pm
- Forum: You and your build
- Topic: Vitara 1.6 8v
- Replies: 10
- Views: 7155
Vitara 1.6 8v
So here i am :) just got a vitara 1.6 8v TBI ( fitted with lpg too ! ) and 3 days in my possession it i already put it on the dyno made a whopping 50 wheel hp and 89 NM wheel torque :lol: :lol: here is a video of the dyno https://fb.watch/eUYox4VTaP/ and the dyno sheet https://scontent-sof1-1.xx.fbc...
- Sat May 07, 2022 4:05 pm
- Forum: Tuning Support: Making it Run
- Topic: rusEFI professional tuners
- Replies: 13
- Views: 26604
Re: rusEFI professional tuners
new post with new info site is up
- Tue Feb 15, 2022 6:37 pm
- Forum: User Support
- Topic: rusEfi map: who is where? map in the first message
- Replies: 101
- Views: 181987
Re: rusEfi map: who is where? map in the first message
hi Panos from Athens Greece
- Tue Feb 15, 2022 6:25 pm
- Forum: Dev: Hardware
- Topic: Proteus Usb Cap
- Replies: 2
- Views: 2564
Re: Proteus Usb Cap
this proteus is missing its mcu yet ( still waiting for it to be delivered )
but yes it will run Rusefi probably on my Z1000 turbo just to get to know the firmware
i will start a new thread when i have it up and running for sure
but yes it will run Rusefi probably on my Z1000 turbo just to get to know the firmware
i will start a new thread when i have it up and running for sure
- Tue Feb 15, 2022 5:46 pm
- Forum: Dev: Hardware
- Topic: Proteus Usb Cap
- Replies: 2
- Views: 2564
Proteus Usb Cap
i got my usb for the Proteus case and i didnt realize that it comes without a cap on UB-20PMFP-LC7002 so i made one
use an oring inside and it should be waterproof
https://www.thingiverse.com/thing:5248219
use an oring inside and it should be waterproof
https://www.thingiverse.com/thing:5248219