Is there any change to officially build also firms without the new bootloader?
I have done more than 1000km with last firmware that JRD McLAREN compiled for our boards and it is fine.
Search found 43 matches
- Mon Feb 06, 2023 7:56 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
- Sat Jan 21, 2023 2:39 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
@JRD McLAREN made for us an firmware with the "tranditional" bootloader and it works fine.
so, bootloader seams to be the one that we should blame.
@mck1117 did you worked on JRD McLAREN unit that that @AndreyB send you?
so, bootloader seams to be the one that we should blame.
@mck1117 did you worked on JRD McLAREN unit that that @AndreyB send you?
- Wed Nov 30, 2022 3:29 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
@AndreyB
Do you think that is possible to locate users with the MCU revision and board that @JRD McLAREN mention here?
https://rusefi.com/forum/viewtopic.php?p=46791#p46791
Do you keep for example an xls-db with MRE versions and STM versions that the users bought?
Do you think that is possible to locate users with the MCU revision and board that @JRD McLAREN mention here?
https://rusefi.com/forum/viewtopic.php?p=46791#p46791
Do you keep for example an xls-db with MRE versions and STM versions that the users bought?
- Sun Nov 27, 2022 6:35 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
software perspective:
This might explain why every next version after july fails!
https://github.com/rusefi/rusefi/releases/tag/20220812_release
This might explain why every next version after july fails!
https://github.com/rusefi/rusefi/releases/tag/20220812_release
- Sun Nov 27, 2022 5:34 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
So any ideas?
is it something at newer firmware's that needs to be changed for "STM32F407 VGT6" ?
This means customs/taxes and maybe months without my daily-driver
is it something at newer firmware's that needs to be changed for "STM32F407 VGT6" ?
Matt is at US?
This means customs/taxes and maybe months without my daily-driver
- Sun Nov 27, 2022 4:50 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
Both ( usefull and burned where purple)
these images are the best i can do
(i will try to locate the burned)
these images are the best i can do
(i will try to locate the burned)
- Sun Nov 27, 2022 3:40 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
AndreyB wrote: ↑Sun Nov 27, 2022 3:31 pmBest I can do is ship my unit of custom version to @mck1117stayros32001 wrote: ↑Sun Nov 27, 2022 3:17 pmIt is the custom version of @JRD McLAREN MRE+sd 5.55rc
to try to start the board and reproduce the issue?
Is any way that I can help also?
- Sun Nov 27, 2022 3:23 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
- Sun Nov 27, 2022 3:17 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
It is the custom version of @JRD McLAREN MRE+sd 5.55rc
https://www.rusefi.com/forum/viewtopic.php?f=4&t=2191
Can I get TLE part number with software?
Full erase didn't work.
Also I noticed that when the flashing ends and it gives message to power cycle, The Fatal led is already on!
https://www.rusefi.com/forum/viewtopic.php?f=4&t=2191
Can I get TLE part number with software?
Full erase didn't work.
Also I noticed that when the flashing ends and it gives message to power cycle, The Fatal led is already on!
- Sun Nov 27, 2022 2:10 pm
- Forum: Dev: Hardware
- Topic: Custom microRusEFI with SD card
- Replies: 76
- Views: 62697
Re: Custom microRusEFI with SD card
Hi, I can not update after my current FW (july 22) I tried all the next ones, august22, sept 22, nov22. I connect the device, update process goes normal, and when I reconect the device, the FATAL state led blinks premenately. I put the device to DFU mode and then I can sent new FW normaly, but only ...
- Wed Aug 17, 2022 12:29 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Success Story Fiat 128 / Zastava 101 1500cc on MRE
New Question about check Engine Function! Ok, at start it blinks once, and TS menu says that in case an error, it will blink for 10sec by default. But what actually is an error? I wanted to check the functionality of check engine and I removed one injector, but nothing happened. https://imgur.com/a/...
- Fri Aug 05, 2022 5:35 pm
- Forum: You and your build
- Topic: Project Fiat 128 1.1 CL swap to microrusEFIe'd Uno Turbo i.e. Mk1
- Replies: 7
- Views: 7190
Re: Project Fiat 128 1.1 CL swap to microrusEFIe'd Uno Turbo i.e. Mk1
Really curious about this project!
Did you finish the car?
My car's success story was based in this detailed topic.
I learned about Rusefi, by googling EFI + fiat 128!
Did you finish the car?
My car's success story was based in this detailed topic.
I learned about Rusefi, by googling EFI + fiat 128!
- Wed Jul 20, 2022 10:53 am
- Forum: Dev: Hardware
- Topic: Wifi Wireless connection
- Replies: 7
- Views: 5943
Re: Wifi Wireless connection
This board is a private project or you will make it open source?
(The MRE board )
(The MRE board )
- Wed Jul 20, 2022 10:50 am
- Forum: Dev: Hardware
- Topic: Smart Relay + CanBus
- Replies: 12
- Views: 9177
Re: Smart Relay + CanBus
I belive that the most ballanced solution is this:
https://www.ecumaster.com/products/pmu/
16 analog inputs + can-keypad
https://www.ecumaster.com/products/pmu/
16 analog inputs + can-keypad
- Sun Jul 17, 2022 10:38 pm
- Forum: Dev: Hardware
- Topic: Wifi Wireless connection
- Replies: 7
- Views: 5943
Re: Wifi Wireless connection
Also very interesting board. I see no TLE.
We absolutely need more info!
We absolutely need more info!
- Fri Jul 15, 2022 2:49 pm
- Forum: Dev: Hardware
- Topic: Smart Relay + CanBus
- Replies: 12
- Views: 9177
Re: Smart Relay + CanBus
Most of my customers as well as myself are big fans of programmable PDM. Mostly canbus based. The less wires in a car, the better for us. That however is just the view from my side, and not gospel. Ok, but I suppose that your clients are racing cars? They are not restoring/resto-moding vw-beetles,m...
- Tue Jul 05, 2022 10:14 pm
- Forum: Dev: Hardware
- Topic: Smart Relay + CanBus
- Replies: 12
- Views: 9177
Re: Smart Relay + CanBus
Giving one example to make my point clear: My car used conventional lamps for everything! I replaced each one of them with led! My new problem now is that due to very bad engineering every time that I press the clutch pedal (which shares same structure with the brake pedal) for 1 sec the break light...
- Tue Jul 05, 2022 9:48 pm
- Forum: Dev: Hardware
- Topic: Smart Relay + CanBus
- Replies: 12
- Views: 9177
Re: Smart Relay + CanBus
I really do not want to put this conversation out of its rails, but, making a pdm with only can connectivity it is not what the most people want. Aftermarket ecu’s are used by people that have the same steering wheel that came out of factory with their cars, same handbrake etc. The want additional f...
- Tue Jun 14, 2022 10:07 am
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
https://github.com/rusefi/rusefi/wiki/Lua-Scripting is the hard way GPPWM should be the easy way but it does not support CLT axis yet https://github.com/rusefi/rusefi/issues/3624 of course I prefer the Hard way. I already now this, but I was not sure if it can be used for lights. So I suppose that ...
- Mon Jun 13, 2022 10:21 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Hi Again!
Is there any way to do this?:
If CLT is over 100c turn on this light! (dash warning light)
Is there any way to do this?:
If CLT is over 100c turn on this light! (dash warning light)
- Mon Jun 06, 2022 9:03 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Try again with newer rusEFI firmware - the wideband controller is now controlled a little bit by the ECU (tells it when to start heating so you don't crack the sensor), so you need newer rusEFI to match newer wideband firmware. The latest prerelease on github has the new wideband protocol support. ...
- Sun May 29, 2022 4:58 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Also STM32CubeProgrammer can not connect with Wbo
ST LINK works only on Auto mode:
ST LINK works only on Auto mode:
- Sun May 29, 2022 11:59 am
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Updates: It was a firmware issue! After updating to the latest release (i was on version 20220126) all the connectivity issues are totally gone! But:! At the same time a new problem popped up! :cry: during the update I was having connected the wideband add-on board. After the update the WBO stopped ...
- Mon May 16, 2022 11:27 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Can you describe the specific problem you're having? What steps to reproduce, and what do you think should happen differently? there are two states of MRE so far: state 1 (everything works normal): no connectiviry issues at all! we can turn on and of the car normaly. ( mostly with cold engine ) sta...
- Mon May 16, 2022 10:16 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Nearly to a success story. After a lot troubleshooting we finaly started the car! Many thanks to my friends Panos and Mitsos for their suggestions! :) Now we are facing a problem that it seams to be firmware problem. We have the same problem like Abricos ( https://www.youtube.com/watch?v=sjbBxfnneMo...
- Wed May 04, 2022 10:23 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
What wideband controller do you use? Anyway, probably yes, you can at least test that the sensor shows very lean while sitting on the desk. You can hold a lighter up to the tip of the sensor (lit or unlit) and you should see a response. actually it is your controller! but the version of the addon b...
- Wed May 04, 2022 10:00 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Update: Didn’t try to start it again and fix the problems but I bought today a LSU4.9 Because it is second-hand (scrap yard / recycling cars center) is it possible to know if it’s good or bad? I mean without starting the car! Could I give at MRE 12V and get a very - very lean reading by having the s...
- Mon May 02, 2022 12:42 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
Mre pin 1
- Mon May 02, 2022 12:16 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
yes, both 1,5 have 12V+ and the dropp normaly () when I turn the key
- Mon May 02, 2022 12:04 pm
- Forum: You and your build
- Topic: Success Story Fiat 128 / Zastava 101 1500cc on MRE
- Replies: 37
- Views: 29165
Re: Suggestion for starting 1st project
no key, pin 29(mre) has, 0,9V
when i turn the key pin 29 has 1.2v!!
tuner studio reads 12.3v battery
edited:
replaced with new tune
https://rusefi.com/online/view.php?msq=1054
when i turn the key pin 29 has 1.2v!!
tuner studio reads 12.3v battery
edited:
replaced with new tune
https://rusefi.com/online/view.php?msq=1054