generated_outputs.h

Go to the documentation of this file.

//DO NOT EDIT MANUALLY, let automation work hard.
 
// auto-generated by PinoutLogic.java based on config/boards/s105/connectors/s105.yaml
#pragma once
 
Gpio GENERATED_OUTPUTS = {
    Gpio::D14, // na 1 - IGN_3
    Gpio::D12, // 2 - IGN_2_3
    Gpio::D15, // na 4 - IGN_4
    Gpio::D13, // 5 - IGN_1_4
    Gpio::D9, // 6 - INJ_2
    Gpio::D10, // 7 - INJ_3
    Gpio::B8, // na 8 - TACH
    Gpio::E0, // 9 - Unk Out 1
    Gpio::B9, // 10 - ECO/CLT Out
    Gpio::D0, // na 25 - R Diff Lock
    Gpio::D8, // 27 - INJ_1
    Gpio::C7, // 28 - Idle valve close
    Gpio::C6, // 29 - Idle valve open
    Gpio::E9, // opt 20 - Fan relay 2 / Unk Out 2
    Gpio::E14, // 31 - CEL
    Gpio::B14, // 46 - Absorber
    Gpio::D11, // 47 - INJ_4
    Gpio::E5, // 48 - AFR 1 Heater
    Gpio::E6, // na 49 - AFR 2 Heater
    Gpio::E12, // 50 - Starter Disable Relay
    Gpio::D6, // opt 58 - Fan Relay 1
    Gpio::E10, // opt 69 - AC Relay
    Gpio::D2, // 70 - Fuel Pump Relay
// "na 1 - IGN_3",
// "2 - IGN_2_3",
// "na 4 - IGN_4",
// "5 - IGN_1_4",
// "6 - INJ_2",
// "7 - INJ_3",
// "na 8 - TACH",
// "9 - Unk Out 1",
// "10 - ECO/CLT Out",
// "na 25 - R Diff Lock",
// "27 - INJ_1",
// "28 - Idle valve close",
// "29 - Idle valve open",
// "opt 20 - Fan relay 2 / Unk Out 2",
// "31 - CEL",
// "46 - Absorber",
// "47 - INJ_4",
// "48 - AFR 1 Heater",
// "na 49 - AFR 2 Heater",
// "50 - Starter Disable Relay",
// "opt 58 - Fan Relay 1",
// "opt 69 - AC Relay",
// "70 - Fuel Pump Relay",
}